Aaron Willard tall case clock. Boston, Massachusetts. Henry Willard, cabinetmaker. Labeled case. Stamped Number 46.

This is a very colorful cross-banded mahogany tall case clock. It was made in Boston, Massachusetts by Aaron Willard. This case retains Henry Willard’s original cabinetmaker’s stamp which can be seen printed onto the backboard of the case. This is inside the waist section. Henry Willard is Aaron’s son and s thought to have many numerous cases for the clockmaking community in Massachusetts. To my knowledge, there are six examples of this unusual and distinctive case form currently known. This is a very late example and represents some of the last examples being produced in Boston. Many of the design elements exhibited here are closely related to the Massachusetts dish dial shelf clock form that Aaron Willard made and sold so well.

This is a high style example. The case is constructed in mahogany and the mahogany veneers are positioned in such a manner that the excellent grain patterns accentuates the case form. The appropriate shellac based finish is clear. The result is that the fancy grain patterns of the of the wood selected are on full display. This case stands on four flared French feet. The retain their original height and elevate the case up off the floor some three inches to the bottom center of the drop apron. A thin applied molding visually separates the feet from the base. The mahogany veneer selected for the base panel is positioned vertically. This figured panel radiates with long sweeping grain lines. The central panel is framed with a cross-banded border along its perimeter. This design element is repeated in the construction of the rectangularly shaped waist door. This door is also trimmed with a simple applied molding. The door opens to access the interior of the case. Here one will have the necessary access to regulate the clock for time. This is done by adjusting the knurled nut at the bottom of the brass faced pendulum bob. Also found inside the case is Henry’s cabinetmaker’s stamp. Henry Willard used this stamp occasionally. It reads. “Henry Willard / Clock Case / MANUFACTURER / 843 / Washington ST. / Boston.” This stamp appears to be done with a transfer of ink. A very small percentage of the Willard clocks that have this stamp survived today. This stamp, positively identifies the cabinetmaker and is a wonderful addition to the history of the clock. How many items do you know of that are made by father and son? Fully turned smooth quarter columns flank the sides of this case. These terminate in brass quarter capitals. They are mounted above veneered blocks. The flat top bonnet features a very fancy and lacy open fretwork design. This is supported with three reeded plinths. Each plinth is capped at the top and fitted with a brass finial. Fully turned bonnet columns visually support the upper bonnet molding. These are mounted in brass capitals. A large diamond pattern of drilled holes is positioned in each of the sides of the hood. These are backed in silk from the inside of the case. The purpose of this hole pattern is to allow the sound of the hour strike to more easily escape the interior of the case. This decorative and useful detail is often associated with Henry Willard’s cabinet shop. The bonnet door is veneered with figured mahogany. This door is fitted with glass. The glass is paint decorated from the back. This pattern is a reoccurring theme on other Willard clocks. Most commonly it is found on dish dial shelf clocks made by numerous clockmakers of the period. Musical harps are centered in the corners or spandrel areas. Gilt leaves are incorporated in the design. All of the detail is back in red. The frame is painted black and gilt borders define the detailed areas. This door opens to access the dial.

This iron dial is a concave form and measures 12 inches in diameter. This concave dial format was also very popular in the shelf clocks being made during this period. Arabic numerals are used to mark the quarter hours and are positioned on the outside of the closed minute ring. Inside the ring, large Roman style numerals are used to mark the hours. A subsidiary seconds dial is located in the traditional location. Please note the wonderfully shaped steel hands that indicate the time. This clock does not have a calendar feature. The Maker’s signature can be found in this location. The signature simply reads, “Aaron Willard / BOSTON.”

The movement is constructed in brass and is good quality. Four turned pillars support the two large brass plates. Hardened steel shafts support the polished steel pinions and brass gearing. The winding drums are grooved. The escapement is designed as a recoil format. The movement is weight driven and designed to run eight-days on a full wind. This clock retains its original red painted tin can weights. The movement is a two train or a time and strike design having a rack and snail striking system. As a result, it will strike each hour on the hour. This is done on a cast iron bell which is mounted above the movement. It is interesting to note that the hammer is returned to the ready position via a coil spring. This is an American feature. This clock also retains its original wooden rod pendulum and brass bob.

This fine example is nicely proportioned and stands approximately 7 feet 11.5 inches or 95.5 inches tall to the top of the center finial. Measured at the feet, this clock is 19.5 inches wide and 10 inches deep. It was made circa 1815.

ZZ-41

About Aaron Willard of Grafton, Roxbury and Boston, Massachusetts.

Aaron Willard was born in Grafton, Massachusetts on October 13th, 1757. Little is known of his early life in Grafton. It is here that he probably learned the skill of clock making from his older brothers Benjamin and Simon. It is recorded that he did march with them in response to the Lexington Alarm on April 19,1775. In 1780, Aaron moved from Grafton to Roxbury along with his brother Simon. Here the two Willard brothers establish a reputation for themselves as fine clock manufactures. They were both responsible for training a large number of apprentices, many of which became famous clock makers in their own right. The Willards dominated the clock making industry in the Boston area during the first half of the nineteenth century. Aaron worked in a separate location in Roxbury from his brother and relocated about a quarter mile away from Simon’s shop across the Boston line about 1792. Aaron is listed in the 1798 Boston directory as a clock maker ‘on the Neck’ and his large shop employed up to 30 people, while 21 other clock makers, cabinetmakers, dial and ornamental painters and gilders worked within a quarter-mile radius by 1807. We have owned a large number of tall case clocks made by this important Maker. In addition, we have also owned a good number of wall timepieces in the form of banjo clocks as well as numerous Massachusetts shelf clock forms.

For more information about this clock click  here .