Elnathan Taber tall clock. Roxbury, Massachusetts. Retaining it's original set up label.

This is a classic New England example. This case exhibits the best of the Boston school proportions and measures approximately 7 feet 11 inches tall to the top of the center finial. It is this very form that all other New England tall clocks are judged against.

This line inlaid mahogany case stands on four ogee bracket feet that support a double stepped base molding. These moldings are applied to the bottom of the base panel. The base panel features a wonderful selection of mahogany wood that is laid out horizontally. The panel is also highlighted with a delicate line inlaid border featuring ovolo corners that frames the front panel. The waist section of this case centers a rectangular shaped waist door that is fitted with an applied molding. The mahogany veneer selected for this prominent location features a long subtle grain pattern. This panel is also line inlaid in the same manner exhibited in the base section. Pasted to the inside of the waist door is the Clockmaker’s original set up label. The sides of this case are fitted with brass stop fluted quarter columns. These terminate in brass quarter capitals. The bonnet features a traditional New England style fret work pattern being supported by fluted and capped plinths.These are fitted with ball and spike finials. The bonnet columns are also brass stop fluted and terminate in brass capitals. The bonnet door is an arched form and is line inlaid. This door opens to access the wonderfully painted iron dial.

This dial is colorfully painted is of English origin and was painted by the Osbourne Manufactory. The four spandrel areas feature colorful floral designs. The arch features a moon phase or lunar calendar. The hours, minutes, seconds and calendar day are all displayed with in the time ring. This dial is signed by the Maker, “E.* TABER /ROXBURY “ in large block lettering.

This fine movement is constructed in brass and is good quality. Four turned pillars support the two brass plates. Hardened steel shafts support the polished steel pinions and brass gearing. The winding drums are grooved. The escapement is designed as a recoil format. The movement is weight driven and designed to run eight days on a full wind. It is a two train or a time and strike design having a rack and snail striking system. As a result, it will strike each hour on the hour. This is done on a cast iron bell which is mounted above the movement.

This beautiful clock was made circa 1795. It stand approximately 7 feet 8 inches tall to the top of the center finial. Measured at the feet, this case is 20 inches wide and 9.5 inches deep. The case is constructed in mahogany with holly line inlays and New England white pine is used as a secondary wood.

About Elnathan Taber Roxbury, Massachusetts

Elnathan Taber was born in Dartmouth, Massachusetts on February 14, 1768. He is the older brother of Stephen Taber. Both brothers traveled to Roxbury and were trained as clockmakers by the Willards. After serving his apprenticeship, Elnathan stayed in Roxbury and worked closely with his Mentor Simon. They had a prosperous working relationship and he became one of Willards most famous apprentices. We have owned and sold numerous tall case clocks made by this maker. In addition, we have also owned a good number of wall timepieces in the form of banjo clocks and coffin clocks as well as several Massachusetts shelf clock forms.

Sold

For more information about this clock click  here .