E. Howard & Co., Boston, MA. Model No. 89. Wall Regulator.

The construction of this case oak is designed to compensate for expansion and contraction as a result changes of humidity and temperature. This very model was specially designed for railroad use.

Ten examples were tested in August of 1889. The regulators tested were furnished to the Buffalo, B. & S. W., the Niagara Falls division of the New York, Lake Erie and Western Railroads. These ten clocks had an average variation from the mean of only 8.9 seconds over the period of one months time. The greatest variation was measured at 24 seconds. Other clocks performed even better. A clock located in the Wabash Station in Moberly, Missouri ran 18 days right on time and 30 days with a three second variation. A clock at the Union Depot in Cleveland, Ohio ran 16 weeks with an extreme variation of only 3 seconds in any one week. As a result, it has developed a reputation of being a very sound time keeper.

This is an excellent example which features a classic finish. The case is constructed in oak and displays a number of decorative details including the long reeded moldings and turned finials. The large door, located on the front of the case, is fitted with a large piece of clear glass. This glass retains the original advertisement of “STANDARD TIME” which is written across the middle in stylized lettering. Through this door, one can view the painted dial which is signed by the Maker in block lettering. The painted zinc dial is measures 12 inches in diameter and is original to this clock. It features Roman hour numerals and a subsidiary seconds dial. This dial is trimmed with an oak bezel or ring and mounts directly to the movement via four posts. The pendulum rod is made of seasoned cherry and at one time was gilded. This rod supports the large brass covered bob that is filled with zinc for compensation. The brass is decorated with an engine turned design. The weight driven movement is very good quality. It is framed with two large brass rectangular shaped plates. The front plate is die-stamped by the maker in the upper left hand corner. The movement, photographed before servicing, is designed to run for eight days on a single wind. It features a Graham Dead Beat Escapement and maintaining power. The movement is wound with a crank key. A Geneva Stop prevents one from over winding this clock. The weight falls directly below the movement. It is hidden from view by the wooden channel constructed inside the case.

This is a large and impressive looking clock. The case measures 65 inches long by 19 inches wide and 8 inches deep. The interior of the case is die stamped with the manufacture date of “5 * 1891” or May 1891.

About Edward Howard of Boston, Massachusetts.

The E. Howard & Company succeeded the Howard & Davis firm in 1857. The Howard and Davis firm was comprised of Edward Howard and David P. Davis and was established in 1842. Both men served their clock apprenticeship under the guidance of Aaron Willard Jr in Boston. The Howard & Davis firm made high-grade clocks, precision balances, sewing machines, fire engines, watches. After the dissolution of Howard and Davis, Edward Howard became Boston’s leading manufacturer of weight-driven residential, commercial, and tower clocks. Howard also sold a large number of watchman and salve clock systems. These sold well in the late 1800s.

It has been said that the E. Howard Clock company never made an inexpensive clock, and everything they made was of very good quality. As a result, Howard clocks have become very collectible and are prized by their owners. Today, the E. Howard clock name enjoys outstanding name recognition.

For a more in-depth reading of Edward Howard and his various businesses, please read “Willard’s Patent Time Pieces” written by Paul Foley.


For more information about this clock click  here .